mojojojo67

New Member
Feb 18, 2019
20
2
3
TWRP Recovery can be found here:
https://forum.freaktab.com/forum/tv-...943#post758943
(Made by Magendanz #1518.1)
or here:
https://1drv.ms/u/s!AoqocX31ecnXgbIdSaKxLK3e-SPboA

[HowTo] install TWRP:
1. install "Recovery reboot app" (google playstore)
2. open app and reboot to recovery.
3. in recovery choose "Apply update from EXT",
choose sd-card and ur TWRP-u211-3.2.3.zip file.
4. install
5. reboot....done...
-----------------------------------------------------------------------

Newest stock firmware update TQ20008 _2019-03-25_OTA_flashable.zip
https://www.dropbox.com/s/5l488pgw9a...hable.zip?dl=0

The update is signed, so it can be installed in the Update app, the stock recovery,
or just use TWRP to install the zip-file.
(TWRP 3.2.3 for S905x2-u211 devices -> https://1drv.ms/u/s!AoqocX31ecnXgbIdSaKxLK3e-SPboA )
(but always do a backup first! )

30k3w54.jpg


older firmware-update zip-file TQ20007_3 (2019-01-16)
https://mega.nz/#!mvJ1GQqD!oUs0D9qsv...j2XwQ9_ByaWP5E
[HowTo] install firmware-update:
(At first start of twrp-recovery do a backup !)
1. reboot to twrp-recovery.
2. choose firmware zip-file .
3. install.
4.reboot.


twrp recovery and firmware-update tested, everything ok.


I use "Square-home-launcher" for this Tv Box.
https://www.google.com/url?sa=t&sour...93N46dRdeAJDuS
Looks similar but a lot of options.
smile.png

sFZbGTB




Navigation bar:
https://www.google.com/url?sa=t&sour...-Jxof6Cas30dmD

Taskbar:
https://www.google.com/url?sa=t&sour...8pxBZNTm_5efk5
 
Last edited:

JimD

New Member
Feb 27, 2019
19
0
1
Ok i understand it gets done from recovery mode...how do I pit the t95q into recovery mode?
 

JimD

New Member
Feb 27, 2019
19
0
1
Ok Mojo...thanks for the instruction..i followed it. It did the update beautifully..no errors.

To test it..i started one movie in kodi to download and about 7 movies in Popcorn time to download at the same time...all with my nord vpn running.

Lasted about 15 mins...it rebooted again.

I felt the device...cool as a cucumber.

Am I just asking too much of the device?
 

mojojojo67

New Member
Feb 18, 2019
20
2
3
mayb VPN is the problem or just too much download at the same time....
the cpu is ok, but dont expect too much...
its just cheap chinese.... :)
 

JimD

New Member
Feb 27, 2019
19
0
1
Yeah...im not limited on the vpn usage..but...i may be being kicked off for using so much bandwidth on the particular at once? Im not sure. I know when I use my full speed without the vpn to download....i rarely reboot...unless im really running heavy like a 30-40gb 4k movie.

Ive ordered a 3gb/64gb h96 pro to test...hopefully it gives better results. Either way...im sending the t95q back. If i need to I can re-order another one later
 

Javier Caceres

New Member
Jan 20, 2020
1
0
1
Hi, I have a TV Box T95Q of 4gb of Ram and 64 of Rom, on Saturday I removed the root, it worked fine, until I turned it off. When I turned it on again it no longer passes the loading screen. So download a Firmware for that box and try to flash it with USB Burning Tool. The program recognizes the device, but then starts the restoration, after 5 seconds the device disconnects and I get the error "0x10102002 Romcode / initialize DDR / Initialize PLL / USB Control Setup Error ", I visited several websites but I can't find a solution.

PD: The device does not disconnect if the USB Burning Tool restorer is not started.

Captura.JPG
Help !!!
 

Dave C

Well-Known Member
Staff member
Marketing
Sep 1, 2015
1,005
90
48
London
www.droix.co.uk
Try a different USB port on the device. Also try connecting the power supply after connecting the USB and the flashing has started.